| Model |
EIS296/S |
EIS596/S |
| Dimensions of Container |
| Flange Diameter |
 18 Max |
30 Max |
| Total Height |
105mm Max |
115mm Max |
| Capacity |
18,000/H (300/Min) Max |
| Adaptable Containers |
| Type |
Syringe |
| Target Solution |
Clear, Suspension, Colored |
| Particle Inspection |
SD system |
| Cosmetic Inspection |
CCD camera + Vision processing |
| Target Defect |
Flange, Plunger, Body, Needle, etc. |
| Data Record System |
File management with PC,
output by printing in A4 size |
| Dimensions and Weight |
| Main body |
4,458W x 2,050L x 2,550H 4,500kg |
| Control Box |
2,050W x 785L x 1,915H 1,000kg |
| Power Supply |
3 50/60Hz 200VAC 10kVA |
| Compressed Air |
392-588kPa (4-6kgf/cm2) |
| Air Volume |
10L/Min |
| Usage Conditions |
| Ambient Temperature |
10-30 |
| Ambient Humidity |
0-75%RH (Non condensing) |
| Installation Site |
Not applicable under the conditions of outdoor, direct sunlight, corrosive gas, volatile gas, steam, dust, vibration |
|
| Model |
EIS596 |
| Dimensions of Container |
| Flange Diameter |
30 Max |
| Total Height |
110mm Max |
| Capacity |
18,000/H (300/Min) Max |
| Adaptable Containers |
| Type |
Vial |
| Target Solution |
Clear, Suspension, Colored, Lyophilized |
| Particle Inspection |
SD system |
| Cosmetic Inspection |
CCD camera + Vision processing |
| Target Defect |
Upper Body, Crack at Neck and Shoulder, Lower Body, Crack at Bottom and Various parts of Lyophilized Content |
| Data Record System |
File management with PC,
output by printing in A4 size |
| Dimensions and Weight |
| Main body |
1,730W x 2,360L x 1,955H 4,600kg |
| Control Box |
1,010W x 1,010L x 1,750H 1,000kg |
| Power Supply |
3 50/60Hz 200V 9.5kVA |
| Compressed Air |
2kgf/cm2 Max |
| Air Volume |
10L/Min |
| Usage Conditions |
| Ambient Temperature |
10-30 |
| Ambient Humidity |
0-75%RH (Non condensing) |
|
|
